Deschideți aplicația noastră gratuită grozavă!

Profitați de oferte exclusive.

Deschidere aplicație
Zonestar P802QR2 Extrudere dublă Kit de DIY pentru imprimante 3D
Zonestar P802QR2 Extrudere dublă Kit de DIY pentru imprimante 3D
Zonestar P802QR2 Extrudere dublă Kit de DIY pentru imprimante 3D
Zonestar P802QR2 Extrudere dublă Kit de DIY pentru imprimante 3D
Zonestar P802QR2 Extrudere dublă Kit de DIY pentru imprimante 3D
1/1
See Translation
1099.83lei
290.82
13 recenzii

Zonestar P802QR2 Extrudere dublă Kit de DIY pentru imprimante 3D - Argint US Plug

Cupon:

promoție:

Suportă plata COD

Warehouse & Fee

Select
CN-099:Expediere între: Aug 17 - Aug 19

Product Options

Select
Argint US Plug
Accesare magazin

Recenzii (13)

Marco
Jun 09,2018
Autolevel seems very important as aluminium bed is not perfectly flat.Stainless metal frame provide establility and durability, only z sliders are 3d printed.Dual extruders for the price of one ;)Issues from P802Q R1 fixed.Look for reviews on forums and youtube, there is a lot of good stuff to check.Good documentation for newbies (assembly, calibation and slicing).Zonestar support returned my fist e-mail in 7 days (including weekend) and he reply the folowing e-mails in 24 hours max. Nicely and helpfull.
Vizualizare mai multe

Discuţie

Vezi mai mult
De ce nu extrudarea suficient de plastic? 1. Diametrul incorect al filamentului; 2. Măriți multiplicatorul de extrudare.

The solution to under-extrusion (not extruding enough plastic)

Descriere

Declinul de responsabilitate: ● Vă rugăm să citiți cu atenție și să urmați manualul de utilizare înainte de asamblarea sau utilizarea imprimantei 3D. ● Modificarea și personalizarea imprimantei 3D sunt strict interzise. Nu ne vom asuma nicio responsabilitate pentru orice probleme care rezultă din modificări. ● Utilizați întotdeauna tensiunea AC corectă pentru regiunea dvs. ● Nu amplasați imprimanta 3D în apropierea materialelor inflamabile / combustibile sau a altor surse de căldură. ● Utilizați imprimanta 3D numai în zone bine ventilate. Mențineți o distanță sigură față de imprimantă.

Caracteristici principale: ● Asamblare extrem de simplă, performanță ridicată ● Structură din tablă din inox oferă un mediu de lucru mai stabil ● Sprijină imprimarea off-line și funcția de nivelare automată ● Cu nivelare automată a platformei și detectare înălțime ● Imprimare în două culori cu extruder dublu ● EM4 Bowden extrudat, ușor de încărcat cu filament, presiune reglabilă și filament flexibil flexibil ● Modul fix cu șurub pentru axa Z ● Rama superioară de vârf modernizată, acces mai ușor la o construcție mai rapidă ● Gravura cu laser de 500mW - 2500mW selectabilă ● Toate într- cu RAMPS V1.4, MKS V1.3, ATMEGA2560 MCU, 5 conectori pentru driverele motorului, 4 comutatoare MOSFET, 3 conector AUX și suport pentru actualizarea mai multor caracteristici

Specificație

General

Marca: ZONESTAR
Model: P802QR2
Tip: DIY
Cantitatea duzei: Dubla
Diametrul duzei: 0.4mm
Dimensiunea formării produsului: 220 x 220 x 240 mm
Grosimea stratului: 0.1-0.36mm
Card de memorie imprimat offline: card SD
Ecran LCD: da
Viteza de imprimare: Max 150mm / s
Materiale suport: ABS,PLA flexibil,PETG,PLA,PVA,Lemn
Diametrul materialului: 1,75 mm
Limba: chinez,Engleză,portugheză,Spaniolă
Tipul fisierului: G-code,OBJ,STL
Acuratețea poziționării axei XY: 0.012mm
Încercarea de poziționare a axei Z: 0,0025mm
Puterea de lucru: 250W
Software pentru gazde gazdă: Repetier-gazdă
Tipul de ambalare: ambalare neamestecată
Suportul sistemului: Windows, Linux, Mac.
Tensiune: 100 - 220V
Certificat: CE,FCC,RoHs

Dimensiuni și greutate

Greutatea produsului: 7,6000 kg
Greutatea pachetului: 9,4000 kg

Conținutul pachetului

Conținutul ambalajului: 1 x kit de DIY pentru imprimante 3D Zonestar P802QR2
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug
Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug

Zonestar P802QR2 Full Acrylic FDM 3D Printer DIY Kit with Double Extruders - Silver US Plug

Package

Contents

1 x ZONESTAR EM4 ExtruderParts Set

1 x WindingTape(2m)

2 x Z-axis Screw LeadFixedModule 

2 x 2GT Belt(90cm for X and Y)  

1 x YMotorSupport 

1 x Wiring Lable Set 

1 x Z-endstopSupport

15 x CableTie(3x10mm)

1 x YPulleyModule

1 x Gantry Framework 

4 x LinearBearing(SCS8UU) 

2 x PTFETube(60cm) 

2 x Pulley(2GT 20 teeth)

1 x AC Power Connector 

2 x Coupling

1 x Metal Frame Parts Set

1 x TemperatureSensor

1 x Filament Feeder(FF3 or FF4)

1 x Motor Wire

1 x Screw and Nut Set  

1 x Proximity Sensor(PL-08N-5V)  

1 x Lead Rod / Screw Set  

1 x Screwdriver  

1 x LCD Screen 

1 x HexagonSpanner Set

1 x MK3 Hotbed  

5 x Motor Wire

6 x Stepper Motor

1 x Y Endstop 

1 x SD Card 

1 x Z Endstop  

1 x Power Supply

1 x LCD Cable  

1 x USB Cable

2 x Z-Axis Slider Parts

1 x AC Power Code


1 x DiagonalPliers 

1 x ZRIB Control Board(compatible with Ramps V1.4)  



Recommended Products

Sponsored Products

Bonus pentru noul membru: cupon de 10 USD
1099.83lei

Zonestar P802QR2 Extrudere dublă Kit de DIY pentru imprimante 3D

Culoare

Mărimea

Cantitate - +
rate: alegere
loading...
loading...
anulare
loading...
loading...
loading...

Recenzii

4.62 *****
  • 9
  • 3
  • 1
  • 0
  • 0
  • Toate ( 13 )
  • ( 6 )
  • ( 2 )
Marco
Jun 09,2018
Autolevel seems very important as aluminium bed is not perfectly flat.Stainless metal frame provide establility and durability, only z sliders are 3d printed.Dual extruders for the price of one ;)Issues from P802Q R1 fixed.Look for reviews on forums and youtube, there is a lot of good stuff to check.Good documentation for newbies (assembly, calibation and slicing).Zonestar support returned my fist e-mail in 7 days (including weekend) and he reply the folowing e-mails in 24 hours max. Nicely and helpfull.
Suggestion:
Z Slides was not very nicely printed, it is a little curved and I cracked when I mount, I had to keep only one screw in the the cooper nut with to avoid stuck the stepper. But you can easily print the replacments as zonestar provide all STL files.Linear bearing seem noisely, I'm considering to try an good clean up or replace it.For the price, the cons is not so impressive as for most of 3d printer kits
Bogu
Jan 31,2018
- CHEAP! - metal frame --> no melting from whatever - newest heating bed (MK3, Alu) - Prusa i3 clone --> huge community - solid machine, if you assemble everything correctly you got a nice and stable printer
Suggestion:
- AC Adaptor: cable directly above power switch - reachability of ZRIB- (control-) Board is´nt that good so for the first tweaks after assembly you need small, long and powerful fingers... - included auto leveling sensor is not good... (but maybe im just too unexperienced) ALL THESE CONS ARE REALLY SMALL! If you keep thinking and trying you´ll fix all that problems.
Sam
Jan 02,2018
Very good overall 3D printer. The dual extruder makes it convenient for printing soluble support. The metal frame makes the printer stronger (and better looking in my opinion). The SD Card is easily accessible from the back of the LED display panel instead of being on the mother board like most other 3D printers.
Suggestion:
The Extrudes were particularity hard to assemble. It took me a while to have them properly extrude the material. The problem is that the spring they give you is often too small, therefore you need to take some pliers and stretch it as much as you can in order for them to give the proper "push" to the extruder lower part. Also, on a minor point, the two material roll brackets are meant for 500g rolls. The majority of 1kg rolls will be too wide and too heavy for the brackets.
LJ
Mar 15,2018
-Build quality is very good, holes line up on the stainless steel frame had no problems with assembling. -A lot of extra screws after assembly that can be used for upgrades. -Some extra wires included -print quality is very good and the printer is easy to use -accuracy is very good
Suggestion:
-struggled quite a bit as my stepper motor controllers started overhearing when I started, a cooling fan needed to be added to cool the motherboard and controllers - on off switch needs to be moved, not a big problem as it was quite easy to make my own design and designs are available on thingiverse. - temperature control on the nozzle far away from the cooling fan is a bit of a problem that I still need to solve.
Luca
Sep 26,2019
Ho aspettato un po’ pubblicare questa recensione perché volevo capire come funzionano le stampanti con due ugelli, devo dire che sono soddisfatto anche se le svariate regolazioni non sono semplicissime inoltre devo dire che reperire dei file bicolore non è sempliceComunque devo dire che il prodotto è conforme alle mie aspettative quindi completamente promossa
Chris
May 17,2018
A good introduction to dual extruder printers with a straight forward build process. The price is pretty good for a dual extruder printer kit.Support was good from Zonestar when I had issues.Issues were fixed relatively easily
Suggestion:
Build plate wasn't flat and although Zonestar's support show you how to fix it (which was adding layers of tape), I ended up putting an Anycubic Ultrabase on mine.One of the X-axis rods was too loose a fit.While the frame is all metal, it requires bracing to make it sturdy.The stepper drivers needed tweaking with a multimeter to reduce the factory set voltage as they were too high and overheated causing movement errors.
CS
Mar 15,2018
good valueseperate temperatures for each hot endmetal framewell packaged after tuning can print quite well
Suggestion:
unclear build instructionsfaulty parts. y-axis bracketdrivers where not set to proper voltage needed much work to print properlylinear bearings need lubricationsome rods were warped
LJ ZA
Aug 16,2018
This is the first 3d printer I bought and I am very happy. I have had this printer now for 6 months and it is still going strong.
Didier
Aug 19,2018
Works well but requires some time to learn how to use.I would recommend this product only to people able to tackle with technical matters Note : The manual recommends to use Repetier as a slicer, but I got good results with Cura
Bernhard
Feb 11,2019
I like the price, assembly is a few hours, the printer gets good results with only minor tweaking.
Vizualizare mai multe
Vizualizare mai multe
Vizualizare mai multe